We Connect Asia

Methanol

Marine Methanol Fuel Quality: What ISO 6583 Decides and What It Leaves Open

10 min read  ·  Nov 2, 2026  ·  By Alex

methanol fuel quality specs

If you write the technical annex of a fuel supply agreement at feasibility stage, cite ISO 6583:2024. It is edition 1, published in November 2024 across 11 pages. The document comes from technical committee ISO/TC 28/SC 4. It sets requirements for methanol from all forms of production at the point of custody transfer. That is where ownership of the lot passes from supplier to buyer, before any onboard treatment. Specifically, it defines three grades, meaning three named quality bands. MMA has the strictest requirements on lubricity, the film that keeps moving parts apart, and on cleanliness. MMB follows the IMPCA reference specification, while MMC carries wider tolerances. By contrast, what it does not decide is where the carbon came from. I set the wider frame in my green methanol explainer.

A methanol fuel specification settles what arrives in the tank and what the engine will accept. Origin, carbon intensity and the claim attached to the voyage sit outside this standard. A different contract answers them with different evidence. Therefore, I keep the two apart from the first draft.

In short

  • The document: edition 1, November 2024, 11 pages, covering methanol from every production route at the point of custody transfer.
  • The grades: MMA with the strictest requirements, MMB aligned to the IMPCA reference specification, MMC with wider tolerances.
  • The gap: purity and properties yes, life-cycle analysis no, so origin sits outside the specification.
  • The frame: category Y under the IBC Code, with safety guidance in MSC.1/Circ.1621 alongside the IGF Code.
  • The contract: grade, sampling point, failure remedy and insurance conditions, all dated before the first delivery.
Facebook
Twitter
LinkedIn

In this article

What a marine fuel specification is for

The short answer stands: cite the published standard itself, edition 1 from November 2024. The document runs 11 pages, and the grade goes in the delivery instruction. A marine fuel specification is a written answer to two questions. It asks what the supplier delivers, and what the engine accepts.

Specifically, it settles what arrives in the tank: purity, impurities, appearance. Also, the chemical properties that decide how the fuel behaves in storage and through the injection system. It applies to methanol from every production route. Moreover, the same applies where ownership of the lot passes, before any onboard treatment. By contrast, it does not settle where the carbon came from.

Therefore, those are two different contracts. The test at the bunker station measures the lot against limits in a table. A certificate evidences the other, following the molecule from its origin. As a result, an agreement that mixes them presents a quality claim as a carbon claim.

What this means for you: write the technical annex as a quality document. Write origin evidence as a separate schedule with its own certification, audit trail and remedy. As a result, I never let one clause carry the risk of the other.

What ISO 6583:2024 actually decides

The ISO catalogue entry records the title “Methanol as a fuel for marine applications. General requirements and specifications”, a published international standard at stage 60.60, edition 1, published in November 2024, 11 pages, from technical committee ISO/TC 28/SC 4 under classification ICS 75.160.20 for liquid fuels. The abstract states that the document sets the general requirements and specifications for methanol from all forms of production. It applies at the point of custody transfer and before any onboard required treatment. The scope covers use in marine diesel engines, fuel cells and other marine applications. It adds that the same specifications can apply to land-based applications. These are applications of the same or similar type as those used at sea.

The handover fixes the condition of the lot when ownership passes. Instead, the reference is not when the lot leaves the producer, nor when the ship has treated it. The marine fuel offtake and bunkering page is where I would have that requirement translated into an annex, clause by clause.

What this means for you: cite the document and its edition in the annex. State the point of transfer once and unambiguously. Then attach the limits to that point. Therefore, everything after it belongs to the ship, and everything before it belongs to the producer.

Who wrote it, and how the three grades differ

SAFETY4SEA records that ship owners, operators, classification societies and national standards bodies wrote the document together. Other technical organisations joined that work. It details purity, impurities, appearance and specific chemical properties. Moreover, it points to standards of the IMPCA, the ISO, the ASTM and other technical bodies. It flags a flash point of about 11 degrees Celsius as a safety concern. That is the temperature at which the fuel gives off vapour that can ignite. It does not cover every health and safety question. Instead, it points to safety data sheets.

The grades are what a buyer signs to. MMA carries the most stringent requirements on lubricity and on particulate cleanliness. Lubricity is the ability of a fuel film to keep moving parts apart under load. By contrast, MMB aligns with the IMPCA reference specification, MMC allows wider tolerances. Also, the standard takes IMPCA specifications as its starting point with some properties treated as less critical at sea. The methanol bunkering page is where the grade has to be written into the delivery instruction.

What this means for you: specify the grade by name. Quote the limit that matters for your engine. Require the certificate of analysis before any hose connects, not after the barge has left.

What the standard does not decide

Solis Marine wrote in September 2025 that the standard gives a technical basis for fuel quality. However, it does not address life-cycle analysis, the assessment of emissions from production through use to disposal. The industry expresses it as well-to-wake, from the wellhead or the power socket to the exhaust stack. Origin therefore needs separate evidence, as grey, blue or green. The same note states that all methanol is chemically identical and burns the same way. It also states that brown and grey methanol produce more life-cycle greenhouse gas emissions than conventional marine hydrocarbon fuels. Green methanol, by contrast, delivers a significant reduction.

CIMAC published a frequently asked questions document on the standard. It covers sampling and testing, the operational half of any quality clause. Colour labels are not a test result. They describe a production route and need a certificate that travels with the lot, not a sentence in a specification. The sustainable maritime fuels page is the frame where quality and carbon stay apart.

What this means for you: keep two files. The specification file answers whether the lot can be burned. By contrast, the origin file answers whether the claim can be told. Therefore, neither substitutes for the other, and I date both.

How the safety framework sits around the fuel

The IMO regulatory mapping, last updated on 24 November 2025, lists ISO 6583:2024 as the external standard for methanol, with the IMPCA reference specification and ASTM D1152 used before it, and gives methanol a high regulatory readiness level. It records that methanol is category Y under the IBC Code, that MARPOL Annex II requirements do not apply to spills and discharges of methanol used as fuel, that only a few marine fuel quality standards exist for alternative fuels, that land-based standards may be enough, and that methane and nitrous oxide emissions from engines are not covered by the current MARPOL Annex VI. Moreover, safety guidance for methyl and ethyl alcohol as fuel sits in MSC.1/Circ.1621 alongside the IGF Code, which does not set detailed requirements for methanol.

Meanwhile, class rules for a methanol vessel tend to sit between the standard and the insurance policy, covering design, construction and equipment. The net-zero framework page carries the part of the framework that prices what a specification cannot see.

What this means for you: read the quality clause against the flag and class requirements at the same time. In fact, a lot that meets the specification can still fail a port state check, and the reverse is true.

What goes into the contract and the insurance file

The five questions I ask before I accept a fuel quality clause

In fact, the specification is only half of the annex. Meanwhile, the other half is what happens when reality diverges from the table of limits. Also, the parties settle that before the fuel is ordered, not after it fails a test. Specifically, I write five questions into every review before I accept a clause in a fuel supply agreement.

  • Governing document and grade: which standard governs the delivery, which edition, and which grade, MMA, MMB or MMC?
  • Sampling point: where does custody transfer sit, who samples there, and against which limit?
  • Origin evidence: which life-cycle evidence travels with the lot, who signed it, and when was it issued?
  • Vessel conditions: which class rules and insurance conditions apply to the ship taking the bunkers?
  • Failure remedy: what happens to the lot when it fails the specification, and who carries the cost of the alternative?

What this means for you: if a clause cannot answer one of these five in writing, it is not ready to sign. Therefore, I send it back rather than negotiate around it.

How I would write the quality appendix for my own file

I build the appendix as four dated rows. Therefore, every row carries its date; any row I cannot date does not go in the file.

  • Standard row: edition 1, published November 2024, 11 pages, general requirements and specifications at the point of custody transfer.
  • Grade row: MMA, MMB or MMC, named in the delivery instruction with the applicable limits attached as an annex.
  • Interface row: the technical reference announced in October 2024, which refers to the standard for quality requirements in its custody transfer section.
  • Origin row: the certificate that proves grey, blue or green methanol, dated and signed, kept outside the specification.

Four rows is deliberately small. In fact, each one is a date I can point at in a negotiation. Also, none of them asks the specification to carry a claim it was never written to make.

What this means for you: hand the appendix to the buyer with the first enquiry, not with the first invoice. A dated appendix shortens the technical review. As a result, it removes the argument about what was agreed before the barge sailed.

Sources

Frequently asked questions

It sets the general requirements and specifications for methanol from all forms of production, at the point of custody transfer and before any onboard treatment required by the ship, for marine diesel engines, fuel cells and other marine applications. It was published as edition 1 in November 2024 in 11 pages. The same specifications can also apply to land-based applications of the same type as those used at sea.

Three grades are available. MMA carries the most stringent lubricity and cleanliness requirements, MMB aligns with the IMPCA reference specification, and MMC allows wider tolerances. Lubricity and particulate cleanliness are the practical difference for fuel injectors, so the grade I specify follows the engine maker’s limits and the filtration actually fitted on board. If a contract says only methanol, without a grade, it has not specified anything.

No. The standard covers purity, impurities, appearance and chemical properties, and it deliberately applies to methanol from every production method, which is why the same document serves grey, blue and green supply. Origin evidence for grey, blue or green methanol therefore sits outside it, in a sustainability certificate with its own audit trail rather than in the specification.

The contract should say in advance who samples, at which custody transfer point, against which grade, and what follows a failure: rejection, price adjustment or redelivery at the seller’s cost. The technical reference announced in October 2024 covers fuel transfer, quality and quantity measurement, operating and safety instructions and crew training, which is the operational side of the same question.

Not sure your project would survive a credit conversation?

A short call is usually enough to see where your project stands.

If you are writing that annex now, the technology maturity and scale-up review is where I check that the specification, the grade and the supply route still hold together once the volumes and the dates are put in front of them.

I do not provide investment advice or arrange investments. I act as a strategic advisor and facilitator.

Alex, Founder of WeConnect Asia

Alex, Founder of WeConnect Asia

I help low-carbon fuel and carbon removal project developers in Southeast Asia secure the commercial and financial partners needed to reach FID.

More about me·Get in touch

Facebook
Twitter
LinkedIn

Related articles